Part Details | SHOULDERED SHAFT
3040-01-121-9535 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 878321605 ITEM 13, 87832-1605 ITEM 13, 878321605, 87832-1605, 7094684876 ITE, 709-4684876 ITE, 7094684876 ITEM 13, 709-4684876 ITEM 13, 7094684876, 709-4684876, 3040-01-121-9535, 01-121-9535, 3040011219535, 011219535
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 11, 1981 | 01-121-9535 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-121-9535
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 87832-1605 ITEM 13 | 96169 | ELECTRIC BOAT CORPORATION |
| 87832-1605 | 96169 | ELECTRIC BOAT CORPORATION |
| 709-4684876 ITE | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 709-4684876 ITEM 13 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
| 709-4684876 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
Technical Data | NSN 3040-01-121-9535
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-1222,TYPE 1,SYM 87 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.1250 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 1.4640 INCHES MINIMUM AND 1.4710 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM |
| FIRST END DIAMETER | 1.5747 INCHES MINIMUM AND 1.5752 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 5 PLAIN |
| SECOND END KEYWAY WIDTH | 0.3750 INCHES MINIMUM AND 0.3770 INCHES MAXIMUM |
| SECOND END EXTERNAL KEYWAY LENGTH | 1.500 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| SECOND END KEYWAY DEPTH | 0.191 INCHES NOMINAL |
| SECOND END DISTANCE FROM KEYWAY CENTER TO END | 1.190 INCHES MINIMUM AND 1.195 INCHES MAXIMUM |
| SECOND END DIAMETER | 1.4960 INCHES MINIMUM AND 1.4980 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 1.810 INCHES NOMINAL |
| OVERALL LENGTH | 7.320 INCHES NOMINAL |
| STEP QUANTITY | 6 |