3040011235028, 3040-01-123-5028, 091443, 3040-01-123-5028 - SHOULDERED SHAFT

Part Details | SHOULDERED SHAFT

3040-01-123-5028 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Alternate Parts: 091443, 3040-01-123-5028, 01-123-5028, 3040011235028, 011235028

Supply Group (FSG)	NSN Assigned	NIIN	Item Name Code (INC)
30	DEC 13, 1981	01-123-5028	22914 ( SHAFT, SHOULDERED )

REFERENCE DRAWINGS & PICTURES

PLAIN

Cross Reference | NSN 3040-01-123-5028

Part Number	Cage Code	Manufacturer
091443	77640	TRW INCDBA COMMERCIAL STEERING DIVISION

Technical Data | NSN 3040-01-123-5028

Characteristic	Specifications
FIRST END STYLE	PLAIN
MATERIAL	STEEL
SURFACE FINISH	10.0 MICROINCHES
FIRST END DIAMETER	1.8753 INCHES NOMINAL
END SIMILARITY	NOT IDENTICAL
SECOND END STYLE	8 PLAIN
SECOND END DIAMETER	1.2500 INCHES NOMINAL
SECOND END SPLINE LENGTH	1.000 INCHES NOMINAL
SECOND END SPLINE MINOR DIAMETER	0.8480 INCHES NOMINAL
SECOND END SPLINE MAJOR DIAMETER	0.9905 INCHES NOMINAL
SECOND END PRESSURE ANGLE	30.0 DEGREES NOMINAL
SECOND END SPLINE QUANTITY	6
LARGEST STEP DIAMETER	1.875 INCHES NOMINAL
OVERALL LENGTH	6.330 INCHES NOMINAL
STEP QUANTITY	4
SPECIAL FEATURES	FIRST END INTERALLY SPLINED; 14 TEETH;1.384 IN.MAJOR DIA; 1.133 IN.MINOR DIA; 1.224 IN. PITCH DIA