Part Details | SHOULDERED SHAFT
3040-01-124-0867 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 10106806, 42020231, 4202023-1, 3040-01-124-0867, 01-124-0867, 3040011240867, 011240867
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 27, 1981 | 01-124-0867 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLAT KEYWAY
PLAIN
FLAT KEYWAY
Cross Reference | NSN 3040-01-124-0867
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 10106806 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
| 4202023-1 | 33068 | TRIUMPH ACTUATION SYSTEMS -CONNECTICUT, LLC |
Technical Data | NSN 3040-01-124-0867
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 PLAIN |
| MATERIAL | STEEL COMP 17-4PH |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643,COMPOSITION 17-4PH ASSN STD ALL MATERIAL RESPONSES |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.2320 INCHES MINIMUM AND 0.2330 INCHES MAXIMUM |
| FIRST END WIDTH ACROSS FLATS | 0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| FIRST END STEP LENGTH | 0.920 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 0 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.0900 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.1390 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.240 INCHES NOMINAL |
| SECOND END DIAMETER | 0.1840 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| SECOND END EXTERNAL THREAD LENGTH | 0.220 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.290 INCHES NOMINAL |
| OVERALL LENGTH | 6.330 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | SECOND END HAS 0.094 IN. NOM W HEX RECESS 0.180 IN. DEEP |
| FSC APPLICATION DATA | POWER UNIT,STEERING |