Part Details | SHOULDERED SHAFT
3040-01-125-7584 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 1822181, 182218-1, 10106814, 3040-01-125-7584, 01-125-7584, 3040011257584, 011257584
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | FEB 01, 1982 | 01-125-7584 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-125-7584
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 182218-1 | 71791 | CURTISS-WRIGHT CONTROLS, INC.DBA CURTISS WRIGHT |
| 10106814 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
Technical Data | NSN 3040-01-125-7584
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8844,CLASS,COND E MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 66.0 MICROINCHES |
| FIRST END DIAMETER | 0.3750 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.200 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 17 |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 0.372 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| OVERALL LENGTH | 5.692 INCHES MINIMUM AND 5.697 INCHES MAXIMUM |
| STEP QUANTITY | 5 |
| FSC APPLICATION DATA | ACTUATOR,ELECTRO-MECHANICAL,ROTARY-CANOPY |