Part Details | SHOULDERED SHAFT
3040-01-125-7585 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 7605001501, 7605-0015-01, 10106815, 3040-01-125-7585, 01-125-7585, 3040011257585, 011257585
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | FEB 01, 1982 | 01-125-7585 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
INTERNAL THREADED
PLAIN
INTERNAL THREADED
Cross Reference | NSN 3040-01-125-7585
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7605-0015-01 | 17472 | EATON CORPORATIONDIV FUEL & MOTION CONTROL SYSTEMS |
| 10106815 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
Technical Data | NSN 3040-01-125-7585
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8690 MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.0995 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | INTERNAL THREADED |
| SECOND END DIAMETER | 0.1870 INCHES NOMINAL |
| SECOND END INTERNAL THREAD LENGTH | 0.240 INCHES MINIMUM |
| LARGEST STEP DIAMETER | 0.187 INCHES NOMINAL |
| OVERALL LENGTH | 4.720 INCHES NOMINAL |
| STEP QUANTITY | 9 |
| FSC APPLICATION DATA | DRIVE,MECHANICAL,FLAP,LE,WING |