Part Details | SHOULDERED SHAFT
3040-01-125-8360 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 20463922, 2046392-2, 20463922, 2046392-2, 20463922, 2046392-2, 10106823, 3040-01-125-8360, 01-125-8360, 3040011258360, 011258360
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | FEB 01, 1982 | 01-125-8360 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-125-8360
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2046392-2 | 76301 | BOEING COMPANY, THEDBA BOEING |
| 2046392-2 | 70210 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
| 2046392-2 | 0ZWK8 | MOOG INC.DBA MOOG AIRCRAFT GROUP TORRANCE |
| 10106823 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
Technical Data | NSN 3040-01-125-8360
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 0.3850 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.1800 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.4182 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 0.4792 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 23 |
| END SIMILARITY | NOT IDENTICAL |
| LARGEST STEP DIAMETER | 1.460 INCHES MINIMUM AND 1.470 INCHES MAXIMUM |
| OVERALL LENGTH | 2.960 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| FSC APPLICATION DATA | DRIVE,MECHANICAL,FLAP,LE,WING |