Part Details | SHOULDERED SHAFT
3040-01-129-4632 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 24915, 24915, 24915, 3040-01-129-4632, 01-129-4632, 3040011294632, 011294632
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 07, 1982 | 01-129-4632 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-129-4632
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 24915 | 6A320 | DETAIL PRODUCTION CO |
| 24915 | 9U166 | MECHANICAL MFG INC |
| 24915 | 24235 | WILLIAMS INTERNATIONAL CO., L.L.C. |
Technical Data | NSN 3040-01-129-4632
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL CORROSION RESISTING |
| FIRST END DIAMETER | 0.2870 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.3600 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.2140 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.2870 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 0.2708 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 13 |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 0.287 INCHES NOMINAL |
| OVERALL LENGTH | 4.550 INCHES NOMINAL |
| STEP QUANTITY | 6 |