Part Details | SHOULDERED SHAFT
3040-01-132-5811 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 10106887, 357950121433, 35-79501-2143-3, 357950121433, 35-79501-2143-3, 3040-01-132-5811, 01-132-5811, 3040011325811, 011325811
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 01, 1982 | 01-132-5811 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-132-5811
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 10106887 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
| 35-79501-2143-3 | 59211 | PARKER-HANNIFIN CORPORATIONDBA CUSTOMER SUPPORT MILITARY |
| 35-79501-2143-3 | 86329 | PARKER-HANNIFIN CORPORATIONDBA GAS TURBINE FUEL SYSTEMS |
Technical Data | NSN 3040-01-132-5811
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 8620 |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6276 MFR REF SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END DIAMETER | 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.330 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.3023 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.3647 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 0.3438 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 11 |
| LARGEST STEP DIAMETER | 0.499 INCHES NOMINAL |
| OVERALL LENGTH | 3.008 INCHES NOMINAL |
| STEP QUANTITY | 4 |