Part Details | SHOULDERED SHAFT
3040-01-136-5036 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 723042, 723042, 723042, 3040-01-136-5036, 01-136-5036, 3040011365036, 011365036
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | AUG 10, 1982 | 01-136-5036 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLAT KEYWAY
CIRCULAR GROOVED
FLAT KEYWAY
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-136-5036
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 723042 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
| 723042 | 58163 | MEGGITT (NORTH HOLLYWOOD), INC.DBA MEGGITT CONTROL SYSTEMS |
| 723042 | 55820 | UNITED TECHNOLOGIES CORPORATIONDBA PRATT & WHITNEY |
Technical Data | NSN 3040-01-136-5036
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 FLAT KEYWAY |
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5640,TYPE 1 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END KEYWAY WIDTH | 0.1350 INCHES MINIMUM AND 0.1450 INCHES MAXIMUM |
| FIRST END EXTERNAL KEYWAY LENGTH | 0.250 INCHES NOMINAL |
| FIRST END KEYWAY DEPTH | 0.039 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| FIRST END DISTANCE FROM KEYWAY CENTER TO END | 1.406 INCHES NOMINAL |
| FIRST END DIAMETER | 0.6640 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.487 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END KEYWAY WIDTH | 0.1260 INCHES MINIMUM AND 0.1280 INCHES MAXIMUM |
| SECOND END EXTERNAL KEYWAY LENGTH | 0.781 INCHES NOMINAL |
| SECOND END KEYWAY DEPTH | 0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| SECOND END DIAMETER | 0.6220 INCHES MINIMUM AND 0.6280 INCHES MAXIMUM |
| SECOND END INTERNAL THREAD LENGTH | 0.620 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.875 INCHES NOMINAL |
| OVERALL LENGTH | 5.504 INCHES NOMINAL |
| STEP QUANTITY | 7 |
| SPECIAL FEATURES | CORROSION RESISTING STEEL |
| END ITEM IDENTIFICATION | 2350-01-061-2445 |
| SUPPLEMENTARY FEATURES | TWO (2) HOLES,0.030 IN. NOMINAL DIA,DRILLED THROUGH TO ID OF UNTHREADEDHOLE,LOCATED 1.406 IN. AND 3.752 IN. FROM FIRST END,AND ON OPPOSITE SIDES OFHOLE |