Part Details | SHOULDERED SHAFT
3040-01-136-5037 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 62734, 3040-01-136-5037, 01-136-5037, 3040011365037, 011365037
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | AUG 10, 1982 | 01-136-5037 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
SPLINED (STRAIGHT)
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-01-136-5037
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 62734 | 93835 | PARKER-HANNIFIN CORPORATIONDBA HYDRAULIC SYSTEMS DIVISION |
Technical Data | NSN 3040-01-136-5037
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643(17-4PH) ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.6400 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.750 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.6826 INCHES MINIMUM AND 0.6926 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.8450 INCHES MINIMUM AND 0.8500 INCHES MAXIMUM |
| FIRST END SPLINE QUANTITY | 16 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 0.6250 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.720 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.5973 INCHES MINIMUM AND 0.6085 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.7450 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 11 |
| LARGEST STEP DIAMETER | 0.978 INCHES MINIMUM AND 0.980 INCHES MAXIMUM |
| OVERALL LENGTH | 2.440 INCHES NOMINAL |
| STEP QUANTITY | 8 |
| END ITEM IDENTIFICATION | 2350010612445 |
| FSC APPLICATION DATA | PUMP-HYDRAULIC,VARIABLE DELIVERY |