Part Details | SHOULDERED SHAFT
3040-01-136-7824 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 1820801, 182080-1, 10106897, 3040-01-136-7824, 01-136-7824, 3040011367824, 011367824
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | AUG 15, 1982 | 01-136-7824 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-136-7824
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 182080-1 | 71791 | CURTISS-WRIGHT CONTROLS, INC.DBA CURTISS WRIGHT |
| 10106897 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
Technical Data | NSN 3040-01-136-7824
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | CPS4911 MFR REF SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 62.0 MICROINCHES |
| FIRST END DIAMETER | 2.0810 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.136 INCHES MINIMUM AND 0.139 INCHES MAXIMUM |
| FIRST END PITCH DIAMETER | 2.0463 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 25.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 60 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.6710 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.620 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 0.7000 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 26.2 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 29 |
| LARGEST STEP DIAMETER | 2.143 INCHES NOMINAL |
| OVERALL LENGTH | 2.840 INCHES MINIMUM AND 2.845 INCHES MAXIMUM |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | FLIGHT SAFETY CRITICAL |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| FSC APPLICATION DATA | ACTUATOR,ELECTRO-MECHANICAL,ROTARY-CANOPY |