Part Details | SHOULDERED SHAFT
3040-01-138-0799 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 5004363, 10106899, 3040-01-138-0799, 01-138-0799, 3040011380799, 011380799
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 06, 1982 | 01-138-0799 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-138-0799
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5004363 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
| 10106899 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
Technical Data | NSN 3040-01-138-0799
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AAMS6470$AAMS6471 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) ALL MATERIAL RESPONSES |
| SURFACE FINISH | 8.0 MICROINCHES |
| FIRST END DIAMETER | 0.5470 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.812 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.4500 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.6000 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 0.5500 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 11 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.7660 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.766 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.6126 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.8500 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 0.8000 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 16 |
| LARGEST STEP DIAMETER | 0.980 INCHES NOMINAL |
| OVERALL LENGTH | 2.922 INCHES NOMINAL |
| STEP QUANTITY | 8 |
| SPECIAL FEATURES | CIRCULAR GROOVE ON FIRST END |
| FSC APPLICATION DATA | FUEL SYSTEM,TURBINE ENGINE,AIRCRAFT |