Part Details | SHOULDERED SHAFT
3040-01-138-8432 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 162C9411P02, 162C9411P02, 3040-01-138-8432, 01-138-8432, 3040011388432, 011388432
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 21, 1982 | 01-138-8432 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-138-8432
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 162C9411P02 | 05326 | GENERAL ELECTRIC COAVIATION COMPONENT SERVICE CENTER |
| 162C9411P02 | 07482 | GENERAL ELECTRIC COMPANYDBA GE |
Technical Data | NSN 3040-01-138-8432
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 0 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6414 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END DIAMETER | 0.2780 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM |
| FIRST END SLOT DEPTH | 0.4100 INCHES NOMINAL |
| FIRST END SLOT WIDTH | 0.1260 INCHES MINIMUM AND 0.1280 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 PLAIN |
| SECOND END DIAMETER | 0.2435 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| SECOND END EXTERNAL THREAD LENGTH | 0.4000 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.278 INCHES MINIMUM AND 0.281 INCHES MAXIMUM |
| OVERALL LENGTH | 4.920 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | FIRST END CROSS DRILLED THRU 0.1265 - 0.1270 IN. DIA,0.16 IN. CEN-TO-END; HARDNESS RC43-48; FEEDBACK SHAFT PART OF CLUTCH ASSY P/N 131D5030 |
| END ITEM IDENTIFICATION | POWER UNIT 131D5023G02 FOR J85-GE-5/-13 AIRCRAFT ENGINE |