Part Details | SHOULDERED SHAFT
3040-01-143-8511 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 7692111, 769211-1, 3040-01-143-8511, 01-143-8511, 3040011438511, 011438511
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 09, 1982 | 01-143-8511 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLAT KEYWAY
FLAT KEYWAY
Cross Reference | NSN 3040-01-143-8511
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 769211-1 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
Technical Data | NSN 3040-01-143-8511
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 0 FLAT KEYWAY |
| MATERIAL | STEEL CORROSION RESISTING |
| FIRST END GROOVE WIDTH | 0.0700 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.1890 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.3300 INCHES NOMINAL |
| FIRST END DIAMETER | 0.2495 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.3300 INCHES NOMINAL |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 0.250 INCHES NOMINAL |
| OVERALL LENGTH | 2.615 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| END ITEM IDENTIFICATION | AGM-86B ALCM |