Part Details | SHOULDERED SHAFT
3040-01-143-9971 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 74A8006162005, 74A800616-2005, 74A8006162003, 74A800616-2003, 10106929, 3040-01-143-9971, 01-143-9971, 3040011439971, 011439971
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 13, 1982 | 01-143-9971 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
TAPERED WITH FLAT
Cross Reference | NSN 3040-01-143-9971
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 74A800616-2005 | 76301 | BOEING COMPANY, THEDBA BOEING |
| 74A800616-2003 | 76301 | BOEING COMPANY, THEDBA BOEING |
| 10106929 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
Technical Data | NSN 3040-01-143-9971
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 5 TAPERED WITH FLAT |
| MATERIAL | ALUMINUM ALLOY 7075 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200 TO 11,COND T73511 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.3750 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.1060 INCHES NOMINAL |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.260 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.566 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| OVERALL LENGTH | 4.400 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | SECOND END IS 0.498 IN. SQUARE,WITH 45 DEG BY 0.060 IN. CHAMFER |
| FSC APPLICATION DATA | QUADRANT ASSEMBLY,POWER CONTROL,AFT COCKPIT |