Part Details | SHOULDERED SHAFT
3040-01-144-8218 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 63219CX, 63219CX, 3040-01-144-8218, 01-144-8218, 3040011448218, 011448218
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 30, 1982 | 01-144-8218 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
INTERNAL THREADED
PLAIN
INTERNAL THREADED
Cross Reference | NSN 3040-01-144-8218
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 63219CX | 45152 | OSHKOSH CORPORATION |
| 63219CX | 75Q65 | OSHKOSH DEFENSE, LLC |
Technical Data | NSN 3040-01-144-8218
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | INTERNAL THREADED |
| MATERIAL | STEEL COMP 1112 |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE1112 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 0.4900 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM |
| FIRST END INTERNAL THREAD LENGTH | 0.750 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | PLAIN |
| SECOND END DIAMETER | 1.0600 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 3.550 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 0.500 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.060 INCHES MINIMUM AND 1.063 INCHES MAXIMUM |
| OVERALL LENGTH | 9.880 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | SECOND END UNTHD CROSS DRILLED HOLE TAPER REAMED AT 30 DEG ANGLE TO A 0.440 IN. DIA |
| END ITEM IDENTIFICATION | 2320-01-304-2277 AND 2320-01-304-2278 PLS (PALLETIZED LOADING SYSTEM) |