Part Details | SHOULDERED SHAFT
3040-01-145-5582 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 875393704 ITEM 8, 87539-3704 ITEM 8, 875393704 ITEM 8, 87539-3704 ITEM 8, 875393704, 87539-3704, 6004789341 ITEM 8, 600-4789341 ITEM 8, 6004789341, 600-4789341, 6004789163 ITEM 8, 600-4789163 ITEM 8, 6004789163, 600-4789163, 3040-01-145-5582, 01-145-5582, 3040011455582, 011455582
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 14, 1983 | 01-145-5582 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-145-5582
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 87539-3704 ITEM 8 | 62991 | DRW MFG CO |
| 87539-3704 ITEM 8 | 96169 | ELECTRIC BOAT CORPORATION |
| 87539-3704 | 96169 | ELECTRIC BOAT CORPORATION |
| 600-4789341 ITEM 8 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
| 600-4789341 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
| 600-4789163 ITEM 8 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
| 600-4789163 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
Technical Data | NSN 3040-01-145-5582
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 0 PLAIN |
| MATERIAL | COPPER ALLOY |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-24059 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 1.4950 INCHES MINIMUM AND 1.4960 INCHES MAXIMUM |
| FIRST END SLOT DEPTH | 0.190 INCHES NOMINAL |
| FIRST END SLOT WIDTH | 0.120 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 PLAIN |
| SECOND END DIAMETER | 0.8750 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.940 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.495 INCHES MINIMUM AND 1.496 INCHES MAXIMUM |
| OVERALL LENGTH | 4.500 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | BORE LG OF SHAFT,0.500/0.501 IN. DIA;COUNTERBORE IN SECOND END,0.560 IN. DIA,1.000 IN. LG |