Part Details | SHOULDERED SHAFT
3040-01-149-6383 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 105096, 3040-01-149-6383, 01-149-6383, 3040011496383, 011496383
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 23, 1983 | 01-149-6383 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLAT KEYWAY
PLAIN
FLAT KEYWAY
Cross Reference | NSN 3040-01-149-6383
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 105096 | 11599 | TRIUMPH ENGINE CONTROL SYSTEMS, LLC |
Technical Data | NSN 3040-01-149-6383
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6470 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.5790 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 1.060 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.4275 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.5288 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 0.5000 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 16 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 7 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.1050 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.5950 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.460 INCHES NOMINAL |
| SECOND END DIAMETER | 1.1800 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.460 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.6150 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.7163 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 22 |
| LARGEST STEP DIAMETER | 1.180 INCHES NOMINAL |
| OVERALL LENGTH | 2.967 INCHES NOMINAL |
| STEP QUANTITY | 3 |