Part Details | SHOULDERED SHAFT
3040-01-152-5485 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 7682278, 7682-278, 7682278, 7682-278, 3040-01-152-5485, 01-152-5485, 3040011525485, 011525485
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 04, 1983 | 01-152-5485 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLAT KEYWAY
FLAT KEYWAY
Cross Reference | NSN 3040-01-152-5485
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7682-278 | 80294 | BOURNS INSTRUMENTS INC |
| 7682-278 | 11871 | RECON/OPTICAL, INC. |
Technical Data | NSN 3040-01-152-5485
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 2 FLAT KEYWAY |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,CLASS 303,CONDITION A FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0290 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM |
| FIRST END GROOVE DIAMETER | 0.2100 INCHES MINIMUM AND 0.2130 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 0.114 INCHES NOMINAL |
| FIRST END DIAMETER | 0.2495 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| FIRST END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.569 INCHES NOMINAL |
| FIRST END SPLINE QUANTITY | 10 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 7 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.0250 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.2200 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.515 INCHES NOMINAL |
| SECOND END DIAMETER | 0.3432 INCHES MINIMUM AND 0.3436 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.515 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.2630 INCHES MINIMUM AND 0.2710 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.3125 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 10 |
| LARGEST STEP DIAMETER | 0.3432 INCHES MINIMUM AND 0.3436 INCHES MAXIMUM |
| OVERALL LENGTH | 1.660 INCHES NOMINAL |
| STEP QUANTITY | 7 |
| SPECIAL FEATURES | 0.093 IN. MIN,0.098 IN. MAX DIA CENTER BORE THRU ENTIRE LG |
| END ITEM IDENTIFICATION | CAI DIV OF RECON/OPTICAL INC FILM MAGAZINE |