Part Details | SHOULDERED SHAFT
3040-01-153-1462 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 876111408 ITEM 14, 87611-1408 ITEM 14, 876111408, 87611-1408, 46746940014, 4674694-0014, 5204674694 ITEM 14, 520-4674694 ITEM 14, 5204674694, 520-4674694, 3040-01-153-1462, 01-153-1462, 3040011531462, 011531462
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 13, 1983 | 01-153-1462 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TAPERED WITH FLAT
PLAIN
TAPERED WITH FLAT
Cross Reference | NSN 3040-01-153-1462
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 87611-1408 ITEM 14 | 96169 | ELECTRIC BOAT CORPORATION |
| 87611-1408 | 96169 | ELECTRIC BOAT CORPORATION |
| 4674694-0014 | 96169 | ELECTRIC BOAT CORPORATION |
| 520-4674694 ITEM 14 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
| 520-4674694 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
Technical Data | NSN 3040-01-153-1462
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 304 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 0.7500 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.3730 INCHES MINIMUM AND 0.3740 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.1560 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.750 INCHES NOMINAL |
| OVERALL LENGTH | 6.120 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | THE SECOND END DRILLED HOLE IS LOCATED AT ASSY |