Part Details | SHOULDERED SHAFT
3040-01-156-6572 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 1381241, 138124-1, 3040-01-156-6572, 01-156-6572, 3040011566572, 011566572
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUN 23, 1983 | 01-156-6572 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-156-6572
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 138124-1 | 24930 | HARRIS CORPORATIONDBA ELECTRONIC SYSTEMS, RADAR |
Technical Data | NSN 3040-01-156-6572
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 303 |
| FIRST END DIAMETER | 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0180 INCHES MINIMUM AND 0.0210 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 0.1750 INCHES MINIMUM AND 0.1770 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.043 INCHES NOMINAL |
| SECOND END DIAMETER | 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM |
| OVERALL LENGTH | 3.120 INCHES NOMINAL |
| STEP QUANTITY | 3 |