Part Details | SHOULDERED SHAFT
3040-01-157-6400 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 2498049, 2498049, 2498049, 3040-01-157-6400, 01-157-6400, 3040011576400, 011576400
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUL 09, 1983 | 01-157-6400 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLATTED
CIRCULAR GROOVED
FLATTED
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-157-6400
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2498049 | 99551 | GOODRICH CORPORATIONDIV POWER TRANSMISSION SYSTEMS |
| 2498049 | 92003 | PARKER HANNIFIN CORPORATIONDIV AEROSPACE GROUP HEADQUARTERS |
| 2498049 | 3H889 | PARKER-HANNIFIN CORPORATIONDBA FLUID SYSTEMS DIVISION |
Technical Data | NSN 3040-01-157-6400
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6415 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0180 INCHES MINIMUM AND 0.0200 INCHES MAXIMUM |
| FIRST END GROOVE DIAMETER | 0.1740 INCHES MINIMUM AND 0.1760 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 0.0700 INCHES MINIMUM AND 0.0800 INCHES MAXIMUM |
| FIRST END DIAMETER | 0.1850 INCHES MINIMUM AND 0.1950 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 FLATTED |
| SECOND END KEYWAY WIDTH | 0.1100 INCHES MINIMUM AND 0.1200 INCHES MAXIMUM |
| SECOND END EXTERNAL KEYWAY LENGTH | 0.060 INCHES NOMINAL |
| SECOND END KEYWAY DEPTH | 0.080 INCHES NOMINAL |
| SECOND END DIAMETER | 0.4340 INCHES MINIMUM AND 0.4360 INCHES MAXIMUM |
| SECOND END EXTERNAL THREAD LENGTH | 0.3750 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| OVERALL LENGTH | 3.870 INCHES MINIMUM AND 3.890 INCHES MAXIMUM |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | RETURN SPRING SHAFT; SECOND END DRILLED 0.060 - 0.065 IN. DIA,1.54 - 1.57 IN. DP TO AN ADJACENT DRILL THRU 0.060 - 0.065 IN. DIA |
| END ITEM IDENTIFICATION | STARTER 36E153-4A,F108 ENGINE FOR KC135R AIRCRAFT |