Part Details | SHOULDERED SHAFT
3040-01-173-1243 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 206T297, 3040-01-173-1243, 01-173-1243, 3040011731243, 011731243
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | FEB 29, 1984 | 01-173-1243 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TAPERED WITH FLAT
PLAIN
TAPERED WITH FLAT
Cross Reference | NSN 3040-01-173-1243
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 206T297 | 27315 | MORRIS MATERIAL HANDLING, INC. |
Technical Data | NSN 3040-01-173-1243
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 0.6350 INCHES MINIMUM AND 0.6390 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.4062 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.188 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.635 INCHES MINIMUM AND 0.639 INCHES MAXIMUM |
| OVERALL LENGTH | 2.156 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | TWO 0.312 INCH W GROOVES,180 DEG APART |
| END ITEM IDENTIFICATION | 3810-01-145-8288 |