Part Details | SHOULDERED SHAFT
3040-01-178-7030 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 736B501, 736B5011, 736B501-1, 626E532 PIECE 4, 3040-01-178-7030, 01-178-7030, 3040011787030, 011787030
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 09, 1984 | 01-178-7030 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
WOODRUFF KEYWAY
PLAIN
WOODRUFF KEYWAY
Cross Reference | NSN 3040-01-178-7030
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 736B501 | 01289 | GENERAL ELECTRIC COMPANYDBA GE DIV GE-AVIATION GEAR PLANT |
| 736B501-1 | 03502 | GENERAL ELECTRIC CONAVAL AND DRIVE TURBINE SYSTEMS DEPT |
| 626E532 PIECE 4 | 03502 | GENERAL ELECTRIC CONAVAL AND DRIVE TURBINE SYSTEMS DEPT |
Technical Data | NSN 3040-01-178-7030
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | WOODRUFF KEYWAY |
| MATERIAL | STEEL COMP 1045 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END KEYWAY WIDTH | 0.2450 INCHES MINIMUM AND 0.2470 INCHES MAXIMUM |
| FIRST END EXTERNAL KEYWAY LENGTH | 3.750 INCHES NOMINAL |
| FIRST END DISTANCE FROM KEYWAY CENTER TO END | 5.001 INCHES NOMINAL |
| FIRST END DIAMETER | 1.4965 INCHES MINIMUM AND 1.4970 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 PLAIN |
| SECOND END DIAMETER | 1.0000 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.875 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.746 INCHES MINIMUM AND 1.747 INCHES MAXIMUM |
| OVERALL LENGTH | 37.688 INCHES NOMINAL |
| STEP QUANTITY | 6 |