Part Details | SHOULDERED SHAFT
3040-01-185-0710 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 217125, 3040-01-185-0710, 01-185-0710, 3040011850710, 011850710
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUL 25, 1984 | 01-185-0710 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-185-0710
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 217125 | 59875 | EATON INDUSTRIAL CORPORATIONDBA ARGO-TECH |
Technical Data | NSN 3040-01-185-0710
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6487H-11 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.7840 INCHES MINIMUM AND 0.7843 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END SPLINE LENGTH | 0.6800 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.7645 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.8725 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 0.8333 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 20 |
| OVERALL LENGTH | 7.160 INCHES MINIMUM AND 7.220 INCHES MAXIMUM |
| SPECIAL FEATURES | BORE THRU SHAFT LENGTH 0.5925 IN. FIRST END,0.5875 IN. SECOND END NOM DIA; 0.241 IN. THK FLANGE 2.16 - 2.17 IN.OD 2 IN. FROM SECOND END; 0.875-20UNJEF-3A THD ON 0.795 IN. DIA SHAFT 3.08 IN.FROM FIRST END; USED TO POWER PUMP IMPELLER |
| END ITEM IDENTIFICATION | MAIN FUEL PUMP,708000,FOR F100 ACFT ENGINE |