Part Details | SHOULDERED SHAFT
3040-01-188-3609 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 363C1431, 363C143-1, 363C1431, 363C143-1, 3040-01-188-3609, 01-188-3609, 3040011883609, 011883609
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 02, 1984 | 01-188-3609 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-188-3609
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 363C143-1 | 17472 | EATON CORPORATIONDIV FUEL & MOTION CONTROL SYSTEMS |
| 363C143-1 | 72121 | EATON MOTOR SITE |
Technical Data | NSN 3040-01-188-3609
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 4130 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.1200 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.2900 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.1875 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 0.2292 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 11 |
| LARGEST STEP DIAMETER | 0.560 INCHES NOMINAL |
| OVERALL LENGTH | 2.310 INCHES NOMINAL |
| STEP QUANTITY | 7 |
| SPECIAL FEATURES | FIRST END 2ND STP THRD; THIRD STP 0.078 IN DIA HOLE THRU; 4TH STP SPLINED; GROVED 2ND END |
| END ITEM IDENTIFICATION | F16 ACFT |