Part Details | SHOULDERED SHAFT
3040-01-192-7388 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 36201561, 3620156-1, SS36201561, SS-3620156-1, 3040-01-192-7388, 01-192-7388, 3040011927388, 011927388
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | OCT 25, 1984 | 01-192-7388 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-192-7388
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3620156-1 | 99193 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
| SS-3620156-1 | 59915 | SERVICE & SALES, INC. |
Technical Data | NSN 3040-01-192-7388
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 1.8895 INCHES MINIMUM AND 1.8898 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 1.7100 INCHES MINIMUM AND 1.7200 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.3000 INCHES MINIMUM AND 0.3600 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 1.7225 INCHES MINIMUM AND 1.7300 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 1.7495 INCHES MINIMUM AND 1.7498 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 1.7323 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 29 |
| LARGEST STEP DIAMETER | 1.8895 INCHES MINIMUM AND 1.8898 INCHES MAXIMUM |
| OVERALL LENGTH | 4.370 INCHES MINIMUM AND 4.380 INCHES MAXIMUM |
| STEP QUANTITY | 9 |
| SPECIAL FEATURES | FIRST END HAS 3 SIDED FLANGE WITH 1 HOLE 0.2505 IN. MIN AND 0.2513 IN. MAX DIA IN EACH POINT |