Part Details | SHOULDERED SHAFT
3040-01-196-9779 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: RG38727, 3040-01-196-9779, 01-196-9779, 3040011969779, 011969779
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 17, 1984 | 01-196-9779 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-196-9779
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| RG38727 | 51663 | CRANE CO.DBA LEAR ROMEC |
Technical Data | NSN 3040-01-196-9779
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6709,COMP A MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END DIAMETER | 0.9990 INCHES MINIMUM AND 0.9995 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END SPLINE LENGTH | 0.751 INCHES MINIMUM AND 0.756 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 0.5500 INCHES MINIMUM AND 0.5550 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.6900 INCHES MINIMUM AND 0.7000 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 0.6000 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL |
| OVERALL LENGTH | 4.080 INCHES NOMINAL |
| STEP QUANTITY | 3 |