Part Details | SHOULDERED SHAFT
3040-01-197-8910 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 1213E2815 FIND 26, 1210C2147, 1213E2815 FIND 26, 1210C2147, 3040-01-197-8910, 01-197-8910, 3040011978910, 011978910
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 29, 1984 | 01-197-8910 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-197-8910
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1213E2815 FIND 26 | 03538 | LOCKHEED MARTIN CORPORATIONDIV RMS |
| 1210C2147 | 03538 | LOCKHEED MARTIN CORPORATIONDIV RMS |
| 1213E2815 FIND 26 | 54497 | MARTIN MARIETTA TECHNOLOGIES INCSUB OF MARTIN MARIETTA CORP |
| 1210C2147 | 54497 | MARTIN MARIETTA TECHNOLOGIES INCSUB OF MARTIN MARIETTA CORP |
Technical Data | NSN 3040-01-197-8910
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 0 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 TYPE 303 FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.8750 INCHES NOMINAL |
| FIRST END SLOT DEPTH | 0.500 INCHES NOMINAL |
| FIRST END SLOT WIDTH | 0.131 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 9 PLAIN |
| SECOND END TONGUE THICKNESS | 0.280 INCHES NOMINAL |
| SECOND END TONGUE WIDTH | 0.375 INCHES NOMINAL |
| SECOND END DIAMETER | 0.3750 INCHES NOMINAL |
| SECOND END STEP LENGTH | 0.380 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.875 INCHES NOMINAL |
| OVERALL LENGTH | 11.250 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | HOLE IN FIRST END 0.750 IN. DP,0.531 IN. DIA |