Part Details | SHOULDERED SHAFT
3040-01-197-9497 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 12272533, 3040-01-197-9497, 01-197-9497, 3040011979497, 011979497
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 31, 1984 | 01-197-9497 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-197-9497
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12272533 | 19200 | US ARMY ARDEC RDECOM |
Technical Data | NSN 3040-01-197-9497
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 0 PLAIN |
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 COND A ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.2494 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM |
| FIRST END SLOT DEPTH | 0.033 INCHES MINIMUM AND 0.053 INCHES MAXIMUM |
| FIRST END SLOT WIDTH | 0.039 INCHES MINIMUM AND 0.048 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 0 PLAIN |
| SECOND END DIAMETER | 0.2494 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM |
| SECOND END SLOT DEPTH | 0.187 INCHES NOMINAL |
| SECOND END SLOT WIDTH | 0.095 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.437 INCHES NOMINAL |
| OVERALL LENGTH | 15.500 INCHES NOMINAL |
| STEP QUANTITY | 1 |
| SPECIAL FEATURES | SHAFT COMES WITH PIN PART NO.MS16562-212; FIRST END CHAMFERED 0.04 INCHBY 45 DEGREES; SECOND END CHAMFERED 0.06 INCH BY 45 DEGREES; SHAFT DIA BETWEEN SHOULDER AND ENDS RANGES FROM 0.2448 AND 0.2498 INCH |