Part Details | SHOULDERED SHAFT
3040-01-199-7336 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 9529M24P01, 9529M24P01, 9529M24P01, 9529M24P01, 9529M24P01, 3040-01-199-7336, 01-199-7336, 3040011997336, 011997336
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 25, 1985 | 01-199-7336 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-199-7336
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 9529M24P01 | 62662 | BMT AEROSPACE USA, INC. |
| 9529M24P01 | 11371 | BMT AEROSPACE USA, INC. |
| 9529M24P01 | 07482 | GENERAL ELECTRIC COMPANYDBA GE |
| 9529M24P01 | 21540 | PRECISION GEAR INCORPORATED |
| 9529M24P01 | 57152 | TRIUMPH GEAR SYSTEMS - MACOMB, INC. |
Technical Data | NSN 3040-01-199-7336
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6709 MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 1.4475 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.650 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 1.2900 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 1.4475 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 1.4000 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 28 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 1.9145 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 1.010 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 1.6800 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 1.9145 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 1.8333 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 25.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 22 |
| LARGEST STEP DIAMETER | 1.9145 INCHES NOMINAL |
| OVERALL LENGTH | 4.640 INCHES NOMINAL |
| STEP QUANTITY | 8 |
| SPECIAL FEATURES | FIRST END OMIT ONE TOOTH; SECOND END FORM DOUBLE TOOTH |
| CRITICALITY CODE JUSTIFICATION | AGAV |
| END ITEM IDENTIFICATION | F110 ENG |