Part Details | SHOULDERED SHAFT
3040-01-201-5446 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 0072041, 007204-1, 0072041, 007204-1, 3040-01-201-5446, 01-201-5446, 3040012015446, 012015446
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | FEB 20, 1985 | 01-201-5446 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
CIRCULAR GROOVED
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-201-5446
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 007204-1 | 62228 | MEGGITT DEFENSE SYSTEMS, INC. |
| 007204-1 | 59027 | MEGGITT DEFENSE SYSTEMS, INC.DBA MEGGITT WESTERN DESIGN |
Technical Data | NSN 3040-01-201-5446
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | STEEL COMP 17-4PH |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5643 COND H 1150 M ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.1200 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.6600 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.100 INCHES NOMINAL |
| FIRST END DIAMETER | 1.0000 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END DIAMETER | 0.7867 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.6360 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.7867 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 0.7500 INCHES NOMINAL |
| SECOND END INTERNAL THREAD LENGTH | 0.625 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL |
| OVERALL LENGTH | 9.687 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | SPLINE HAS 15 TEETH; SPLINE LENGTH IS 9.647 INCH; SPLINE HAS PRESSURE ANGLE OF 30 DEGREES; PASSIVATE SHAFT PER QQ-P-35 TYPE 1,2 OR 3 |