Part Details | SHOULDERED SHAFT
3040-01-202-4516 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 2308105, 2308105, 3040-01-202-4516, 01-202-4516, 3040012024516, 012024516
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 02, 1985 | 01-202-4516 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
TAPERED WITH FLAT
Cross Reference | NSN 3040-01-202-4516
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2308105 | 54089 | DRS C3 & AVIATION COMPANYDBA DRS DATA & IMAGING SYSTEMS |
| 2308105 | 22380 | DRS PHOTRONICS, INC.DBA DRS PHOTRONICS, INC. |
Technical Data | NSN 3040-01-202-4516
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 0 TAPERED WITH FLAT |
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,CONDITION A FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END DIAMETER | 0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| FIRST END BEARING SEAT LENGTH | 0.060 INCHES NOMINAL |
| FIRST END BEARING SEAT DIAMETER | 0.6250 INCHES NOMINAL |
| FIRST END DISTANCE FROM BEARING SEAT TO END | 1.500 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.3740 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.0930 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.190 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.625 INCHES NOMINAL |
| OVERALL LENGTH | 3.750 INCHES NOMINAL |
| STEP QUANTITY | 3 |