Part Details | SHOULDERED SHAFT
3040-01-205-7534 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: RG546682, RG54668-2, 3040-01-205-7534, 01-205-7534, 3040012057534, 012057534
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 11, 1985 | 01-205-7534 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-205-7534
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| RG54668-2 | 51663 | CRANE CO.DBA LEAR ROMEC |
Technical Data | NSN 3040-01-205-7534
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 2 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6709 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END DIAMETER | 0.3678 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| FIRST END EXTERNAL THREAD LENGTH | 0.430 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 PLAIN |
| SECOND END DIAMETER | 0.9919 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| SECOND END EXTERNAL THREAD LENGTH | 0.560 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.830 INCHES NOMINAL |
| OVERALL LENGTH | 6.898 INCHES MINIMUM AND 6.912 INCHES MAXIMUM |
| STEP QUANTITY | 7 |
| SPECIAL FEATURES | FIRST END SECOND STEP 0.625-18UNJF-3A THD 0.680 IN. L; SECOND END 3.35 IN. L BORE 0.484 IN. DIA W/CBORE 0.6325 IN. DIA CHAM 60 DEG 0.680 IN. DIA,INTERNAL SPLINE 13 TEETH,0.5417 IN. PITCH DIA,0.500 - 0.505 IN. MINOR DIA,0.6167 - 0.6257 IN. MAJOR DIA |
| END ITEM IDENTIFICATION | FUEL BOOST PUMP,RR54660,FOR F110 ACFT ENG |