Part Details | SHOULDERED SHAFT
3040-01-209-5025 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 5007478, 3040-01-209-5025, 01-209-5025, 3040012095025, 012095025
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 31, 1985 | 01-209-5025 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-209-5025
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5007478 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
Technical Data | NSN 3040-01-209-5025
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 0.7990 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 1.7660 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.5000 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.6880 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 0.6250 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 10 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.9620 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 1.6250 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.6926 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.8500 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 0.8000 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 16 |
| LARGEST STEP DIAMETER | 0.9620 INCHES NOMINAL |
| OVERALL LENGTH | 4.2100 INCHES NOMINAL |
| STEP QUANTITY | 8 |
| SPECIAL FEATURES | CENTER BORE THRU MAX DIA 0.2500 IN.,63 MICRO IN. FINISH |
| END ITEM IDENTIFICATION | U/O PUMP,MAIN FUEL PN 1265M11P02 FOR F110 ENGINE |
| FSC APPLICATION DATA | ENGINE FUEL SYSTEM COMPONENTS,AIRCRAFT |