Part Details | SHOULDERED SHAFT
3040-01-213-5570 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 31719361, 3171936-1, 3040-01-213-5570, 01-213-5570, 3040012135570, 012135570
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUL 27, 1985 | 01-213-5570 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3040-01-213-5570
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3171936-1 | 59364 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
Technical Data | NSN 3040-01-213-5570
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 347 |
| MATERIAL DOCUMENT AND CLASSIFICATION | AQQ-S-763$JGAAMS 5646 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) 1ST MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END DISTANCE FROM END TO FLAT | 0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| FIRST END GROOVE WIDTH | 0.0940 INCHES MINIMUM AND 0.1040 INCHES MAXIMUM |
| FIRST END GROOVE DIAMETER | 0.1360 INCHES MINIMUM AND 0.1380 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 0.976 INCHES MINIMUM AND 1.116 INCHES MAXIMUM |
| FIRST END DIAMETER | 0.2481 INCHES MINIMUM AND 0.2490 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.1630 INCHES MINIMUM AND 0.1720 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 1.8120 INCHES MINIMUM AND 1.8420 INCHES MAXIMUM |
| FIRST END HOLE DEPTH | 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| FIRST END GROOVED FLAT LENGTH | 0.2600 INCHES MINIMUM AND 0.2800 INCHES MAXIMUM |
| FIRST END GROOVED FLAT DEPTH | 0.0331 INCHES MINIMUM AND 0.0340 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END DIAMETER | 0.4991 INCHES MINIMUM AND 0.4996 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.1630 INCHES MINIMUM AND 0.1720 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 3.100 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| SECOND END ANGLE BETWEEN HOLES | 57.0 DEGREES NOMINAL |
| LARGEST STEP DIAMETER | 0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| OVERALL LENGTH | 7.880 INCHES MINIMUM AND 7.910 INCHES MAXIMUM |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | BOTH ENDS DRILLED AND COUNTERSUNK AXIALLY |