Part Details | SHOULDERED SHAFT
3040-01-214-8054 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 5184129 PIECE NO.59, 5184129, 804518412959, 804-5184129/59, 3040-01-214-8054, 01-214-8054, 3040012148054, 012148054
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | AUG 15, 1985 | 01-214-8054 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TAPERED WITH FLAT
PLAIN
TAPERED WITH FLAT
Cross Reference | NSN 3040-01-214-8054
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5184129 PIECE NO.59 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 5184129 | 53711 | NAVAL SEA SYSTEMS COMMAND |
| 804-5184129/59 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
Technical Data | NSN 3040-01-214-8054
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 4 TAPERED WITH FLAT |
| MATERIAL | STEEL |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.500 INCHES NOMINAL |
| FIRST END HOLE DEPTH | 0.500 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.7350 INCHES MINIMUM AND 0.7400 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 2.000 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.5950 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.7350 INCHES MINIMUM AND 0.7400 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 0.6875 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 10 |
| LARGEST STEP DIAMETER | 0.735 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| OVERALL LENGTH | 4.500 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | 2 THREADED HOLES FIRST END 0.375-16 UNC,1.000 IN. APART |