Part Details | SHOULDERED SHAFT
3040-01-214-9301 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 23017954, 3040-01-214-9301, 01-214-9301, 3040012149301, 012149301
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | AUG 17, 1985 | 01-214-9301 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
SPLINED (STRAIGHT)
INTERNAL THREADED
SPLINED (STRAIGHT)
INTERNAL THREADED
Cross Reference | NSN 3040-01-214-9301
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 23017954 | 73342 | ALLISON TRANSMISSION, INC. |
Technical Data | NSN 3040-01-214-9301
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL COMP 4340 |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE 4340H NATIONAL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 2.2490 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 2.140 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 1.8160 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 2.1075 INCHES NOMINAL |
| FIRST END SPLINE QUANTITY | 16 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | INTERNAL THREADED |
| SECOND END DIAMETER | 2.8300 INCHES NOMINAL |
| SECOND END INTERNAL THREAD LENGTH | 1.211 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 2.830 INCHES NOMINAL |
| OVERALL LENGTH | 16.030 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | SECOND END INTERNALLYSPLINED,30 TEETH,16/32 DP,30 DEG PRESSURE ANGLE |