Part Details | SHOULDERED SHAFT
3040-01-216-1520 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 1945215 PIECE 6, SSN5932041863354 PIECE 6, SSN593-204-1863354 PIECE 6, 3040-01-216-1520, 01-216-1520, 3040012161520, 012161520
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 06, 1985 | 01-216-1520 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-216-1520
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1945215 PIECE 6 | 80064 | NAVAL SHIP SYSTEMS COMMAND |
| SSN593-204-1863354 PIECE 6 | 81316 | PORTSMOUTH NAVAL SHIPYARD |
Technical Data | NSN 3040-01-216-1520
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | NICKEL ALLOY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-296 CLA FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 1.0540 INCHES MINIMUM AND 1.0550 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 1.4969 INCHES MINIMUM AND 1.4985 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 4.0620 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 1.1076 INCHES MINIMUM AND 1.1293 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 1.4969 INCHES MINIMUM AND 1.4985 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 1.3333 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 8 |
| LARGEST STEP DIAMETER | 1.4969 INCHES MINIMUM AND 1.4985 INCHES MAXIMUM |
| OVERALL LENGTH | 16.812 INCHES NOMINAL |
| STEP QUANTITY | 4 |