Part Details | SHOULDERED SHAFT
3040-01-224-6477 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 2670164, 3040-01-224-6477, 01-224-6477, 3040012246477, 012246477
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 19, 1986 | 01-224-6477 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLAT KEYWAY
FLAT KEYWAY
Cross Reference | NSN 3040-01-224-6477
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2670164 | 06848 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
Technical Data | NSN 3040-01-224-6477
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 7 FLAT KEYWAY |
| MATERIAL | STEEL CORROSION RESISTING |
| FIRST END GROOVE DIAMETER | 0.1900 INCHES NOMINAL |
| FIRST END DIAMETER | 0.2546 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.428 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.2330 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.2450 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END SPLINE LENGTH | 0.500 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.246 INCHES NOMINAL |
| OVERALL LENGTH | 4.408 INCHES NOMINAL |
| STEP QUANTITY | 8 |
| SPECIAL FEATURES | BOTH ENDS W/0.125 IN. MAX CENTER BORE; 0.06 IN. DIA CROSS-DRILLED HOLE THRU FIRST END 0.478 IN. C-TO-END,THRU SECOND END 0.105 IN. C-TO-END; DIA 0.250 NOM STRAIGHT SIDE SERRATION 36 TEETH CLASS B BOTH ENDS; GROOVE FIRST END 0.318 IN. CEN-TO-END,SECOND END 0.105 IN. CEN-TO-END |
| END ITEM IDENTIFICATION | METERING PLATE ON MAIN FUEL CONTROL MODEL CJ-BA1 |