Part Details | SHOULDERED SHAFT
3040-01-243-9042 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 212F238, 3040-01-243-9042, 01-243-9042, 3040012439042, 012439042
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 02, 1986 | 01-243-9042 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
TAPERED WITH FLAT
Cross Reference | NSN 3040-01-243-9042
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 212F238 | 05606 | GENERAL DYNAMICS-OTS, INC.DBA GD-OTS (WILLISTON) |
Technical Data | NSN 3040-01-243-9042
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 TAPERED WITH FLAT |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 0.1250 INCHES NOMINAL |
| FIRST END HOLE DIAMETER | 1.3800 INCHES NOMINAL |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.2480 INCHES MINIMUM AND 0.2490 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.1260 INCHES MINIMUM AND 0.1290 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 1.360 INCHES MINIMUM AND 1.400 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.340 INCHES NOMINAL |
| OVERALL LENGTH | 8.300 INCHES NOMINAL |
| STEP QUANTITY | 2 |