Part Details | SHOULDERED SHAFT
3040-01-245-4190 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 219F105, 3040-01-245-4190, 01-245-4190, 3040012454190, 012454190
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 27, 1986 | 01-245-4190 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLAT KEYWAY
FLAT KEYWAY
Cross Reference | NSN 3040-01-245-4190
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 219F105 | 05606 | GENERAL DYNAMICS-OTS, INC.DBA GD-OTS (WILLISTON) |
Technical Data | NSN 3040-01-245-4190
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 7 FLAT KEYWAY |
| MATERIAL | 0$DST4130$DST4140 |
| MATERIAL DOCUMENT AND CLASSIFICATION | BASTM-A322$CASTM-A331$DASTM-A331 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) ALL MATERIAL RESPONSES |
| SURFACE FINISH | 250.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0781 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM |
| FIRST END GROOVE DIAMETER | 0.5410 INCHES MINIMUM AND 0.5510 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 0.6250 INCHES MINIMUM AND 0.6406 INCHES MAXIMUM |
| FIRST END DIAMETER | 0.6250 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 1.2188 INCHES MINIMUM AND 1.2812 INCHES MAXIMUM |
| FIRST END SPLINE MINOR DIAMETER | 0.6390 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.7499 INCHES MINIMUM AND 0.7501 INCHES MAXIMUM |
| FIRST END SPLINE QUANTITY | 23 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 7 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.0781 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 0.5410 INCHES MINIMUM AND 0.5510 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.6250 INCHES MINIMUM AND 0.6406 INCHES MAXIMUM |
| SECOND END DIAMETER | 0.6250 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 1.2188 INCHES MINIMUM AND 1.2812 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 0.7640 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.8418 INCHES MINIMUM AND 0.9062 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 27 |
| LARGEST STEP DIAMETER | 0.8720 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| OVERALL LENGTH | 11.1719 INCHES MINIMUM AND 11.2031 INCHES MAXIMUM |
| STEP QUANTITY | 7 |