Part Details | SHOULDERED SHAFT
3040-01-245-4863 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 5000210, 3040-01-245-4863, 01-245-4863, 3040012454863, 012454863
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 29, 1986 | 01-245-4863 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLAT KEYWAY
PLAIN
FLAT KEYWAY
Cross Reference | NSN 3040-01-245-4863
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5000210 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
Technical Data | NSN 3040-01-245-4863
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL COMP 17-4PH |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS-5643 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.4730 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.626 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.3330 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.4060 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 0.3750 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 12 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 0 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.0940 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.359 INCHES NOMINAL |
| SECOND END DIAMETER | 0.3750 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.359 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.562 INCHES NOMINAL |
| OVERALL LENGTH | 3.179 INCHES NOMINAL |
| STEP QUANTITY | 8 |
| SPECIAL FEATURES | ITEM HAS THRU HOLE 0.078 DIA. 0.203 IN. FROM SECOND END |
| END ITEM IDENTIFICATION | B1B AIRCRAFT,FLIGHT CONTROL |