Part Details | SHOULDERED SHAFT
3040-01-245-9456 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 5000230, 3040-01-245-9456, 01-245-9456, 3040012459456, 012459456
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 06, 1986 | 01-245-9456 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3040-01-245-9456
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5000230 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
Technical Data | NSN 3040-01-245-9456
| Characteristic | Specifications |
|---|---|
| MATERIAL DOCUMENT AND CLASSIFICATION | MS10.3 MFR REF SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 250.0 MICROINCHES |
| FIRST END DIAMETER | 0.6100 INCHES MINIMUM AND 0.6400 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.4160 INCHES MINIMUM AND 0.4240 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END DIAMETER | 0.5520 INCHES MINIMUM AND 0.5720 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.4160 INCHES MINIMUM AND 0.4240 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| OVERALL LENGTH | 1.567 INCHES MINIMUM AND 1.573 INCHES MAXIMUM |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | HAS INTERNAL INVOLUTE SPLINES; FLAT ROOT SIDE-FIT; 12 TEETH; 0.3750 PITCH DIA; 30 DEG PRESSURE ANGLE; PITCH FRACTION 32/64 AGAVGACFT,TYPE B-1B |
| SUPPLEMENTARY FEATURES | APPL TO FLIGHT CONTROL |