Part Details | SHOULDERED SHAFT
3040-01-248-9821 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 5000263, 3040-01-248-9821, 01-248-9821, 3040012489821, 012489821
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | FEB 03, 1987 | 01-248-9821 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-248-9821
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5000263 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
Technical Data | NSN 3040-01-248-9821
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-46850,TYPE III MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.4500 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.563 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.3000 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.4500 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 0.4000 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 8 |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 4.749 INCHES NOMINAL |
| OVERALL LENGTH | 6.125 INCHES NOMINAL |
| STEP QUANTITY | 6 |
| SPECIAL FEATURES | BOTH ENDS OF SHAFT HAVE PLAIN TIPS THAT ARE 0.125 IN. LONG AND 0.250 DIA. |
| END ITEM IDENTIFICATION | B-1B AIRCRAFT FLIGHT CONTROL |