Part Details | SHOULDERED SHAFT
3040-01-251-1038 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 20423023, 2042302-3, 3040-01-251-1038, 01-251-1038, 3040012511038, 012511038
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 12, 1987 | 01-251-1038 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3040-01-251-1038
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2042302-3 | 70210 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
Technical Data | NSN 3040-01-251-1038
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,COMP 4340 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END DIAMETER | 0.9950 INCHES MINIMUM AND 1.0050 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.9705 INCHES MINIMUM AND 0.9735 INCHES MAXIMUM |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| END ITEM IDENTIFICATION | ACFT,TYPE F-16C AND D |