Part Details | SHOULDERED SHAFT
3040-01-260-8112 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 202142301, 202142-301, 3040-01-260-8112, 01-260-8112, 3040012608112, 012608112
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | AUG 05, 1987 | 01-260-8112 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-260-8112
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 202142-301 | 88932 | NORTHROP GRUMMAN CORPPRECISION PRODUCTS PLANT |
Technical Data | NSN 3040-01-260-8112
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 2 PLAIN |
| MATERIAL | STEEL COMP 316 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.3750 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.5600 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0755 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.1455 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.0755 INCHES NOMINAL |
| SECOND END DIAMETER | 0.3725 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.375 INCHES NOMINAL |
| OVERALL LENGTH | 3.000 INCHES NOMINAL |
| STEP QUANTITY | 7 |
| SPECIAL FEATURES | GROOVE 0.560 IN. FROM FIRST END. 0.250 IN. WIDE WITH HOLE CROSSDRILLED 0.125 IN. DIA THRU |
| END ITEM IDENTIFICATION | USED ON TGG COPLANARITY UNIT |