Part Details | SHOULDERED SHAFT
3040-01-274-4789 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: A3030621, 3040-01-274-4789, 01-274-4789, 3040012744789, 012744789
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 09, 1988 | 01-274-4789 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-01-274-4789
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| A3030621 | 80063 | US ARMY COMMUNICATIONS &ELECTRONICS MATERIEL READINESS |
Technical Data | NSN 3040-01-274-4789
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 304 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 3.0 MILLIMETERS NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.64 MILLIMETERS NOMINAL |
| SECOND END GROOVE DIAMETER | 2.3 MILLIMETERS NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 1.0 MILLIMETERS NOMINAL |
| SECOND END DIAMETER | 3.0 MILLIMETERS NOMINAL |
| LARGEST STEP DIAMETER | 7.0 MILLIMETERS NOMINAL |
| OVERALL LENGTH | 13.6 MILLIMETERS NOMINAL |
| STEP QUANTITY | 3 |