Part Details | SHOULDERED SHAFT
3040-01-276-9315 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 2042306, 204230-6, 3040-01-276-9315, 01-276-9315, 3040012769315, 012769315
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 15, 1988 | 01-276-9315 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-01-276-9315
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 204230-6 | 70210 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
Technical Data | NSN 3040-01-276-9315
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL COMP 4340 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 1.0000 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.4000 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.8471 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 1.0000 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 0.5312 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 15 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | PLAIN |
| SECOND END DIAMETER | 1.0000 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL |
| OVERALL LENGTH | 2.490 INCHES NOMINAL |
| STEP QUANTITY | 7 |
| SPECIAL FEATURES | BORE 0.500 IN. DIA THRU FROM SECOND END,C/BORE 0.6702 IN. DIA 1.190 IN.DEEP;TWO HOLES IN LINE 0.315 IN. DIA 0.705 IN. FROM END |
| END ITEM IDENTIFICATION | USED ON LEADING EDGE ROTARY ACTUATOR FOR THE F-16C/D COMMON ACFT |