Part Details | SHOULDERED SHAFT
3040-01-282-6971 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 1608015, 1608015, 3040-01-282-6971, 01-282-6971, 3040012826971, 012826971
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUL 21, 1988 | 01-282-6971 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLAT KEYWAY
TONGUE
FLAT KEYWAY
TONGUE
Cross Reference | NSN 3040-01-282-6971
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1608015 | 44114 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
| 1608015 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
Technical Data | NSN 3040-01-282-6971
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 6 FLAT KEYWAY |
| MATERIAL | STEEL COMP 1020 |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0280 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM |
| FIRST END GROOVE DIAMETER | 0.3520 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.290 INCHES NOMINAL |
| FIRST END DIAMETER | 0.3740 INCHES NOMINAL |
| FIRST END SLOT DEPTH | 0.187 INCHES NOMINAL |
| FIRST END SLOT WIDTH | 0.156 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 TONGUE |
| SECOND END FLAT DEPTH | 0.1570 INCHES NOMINAL |
| SECOND END FLAT LENGTH | 0.188 INCHES NOMINAL |
| SECOND END DIAMETER | 1.0000 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.1870 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.188 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 0.188 INCHES NOMINAL |
| SECOND END ANGLE BETWEEN HOLES | 120.0 DEGREES NOMINAL |
| LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL |
| OVERALL LENGTH | 1.031 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | TWO CROSS DRILLED HOLES,0.187 IN.APART,180 DEG |